Next: RIP Debug Commands, Previous: RIP Timers, Up: RIP [Contents][Index]
To display RIP routes.
Show RIP routes.
The command displays all RIP routes. For routes that are received through RIP, this command will display the time the packet was sent and the tag information. This command will also display this information for routes redistributed into RIP.
The command displays current RIP status. It includes RIP timer, filtering, version, RIP enabled interface and RIP peer inforation.
ripd> show ip rip status
Routing Protocol is "rip"
Sending updates every 30 seconds with +/-50%, next due in 35 seconds
Timeout after 180 seconds, garbage collect after 120 seconds
Outgoing update filter list for all interface is not set
Incoming update filter list for all interface is not set
Default redistribution metric is 1
Redistributing: kernel connected
Default version control: send version 2, receive version 2
Interface Send Recv
Routing for Networks:
eth0
eth1
1.1.1.1
203.181.89.241
Routing Information Sources:
Gateway BadPackets BadRoutes Distance Last Update